All the high voltage electronics are now neatly mounted on the rear tray.  In the process of remounting everything, I removed a lot of excess wire  to clean everything up:

My goal is to make the tray removable to enable easy access to all the electronics.  To make this work, I need to “connectorize” the pack, the motor and all the low voltage control lines.  My plan is to get two beefy Anderson connectors (one for the battery pack and one for the motor) and some kind of multiconductor bayonet connector for all the low voltage lines…

Here’s a couple pictures I took a while back, but didn’t include in previous posts.

This is a shot of the roll cage/body mount:

As you can see, I still need to weld the last piece to attach the windshield pillars to the chassis.

Here’s a shot of my LED tail lights: